|
|
WIRE CUTTING BED
|
 |
|
|
 |
 |
Features fast cutting:
discharge circuit using high-power MOS FET transistor design, with precise control and effective monitoring of rapid energy changes in each of energy, the maximum processing speed of up to 150mm2/min. Intelligent processing of input processing wire diameter, workpiece material, thickness and processing mode, can automatically tune the database by the processing of the best processing conditions; to do the second, third, fourth Dresser set of processing conditions. Automatically reset if the processing center line break off, button press line, the line can be automatically cut back to the point, and follow the path back to the break-point processing. Automatic wire threading through the operator only under the seeker, copper wire can be automatically sent to the collection box. Good heat balance and high rigidity structure design to ensure accurate processing of UV-axis design at the top of the column, to ensure its stability, and the water at high pressure and high tension when the slant can be made precise processing of high rigidity of the transmission system, to ensure positioning accuracy using a linear ball screw and the LM rail, AC servo motor directly drives the ball screw, sensitive servo system to ensure continuous high-frequency processing using the work surface and drainage channels, increase machine life
|
| Control System
|
Two planes, two-axis linear and circular interpolation
automatically lock mechanical origin, return to zero quickly locate
automatically locking edge groove, bore center, the cylindrical central locking
machine single-step, sequential manual shift
processing time and completion time forecast section leap
selected data processing program dry run set
system date and time modify
he color to set the incremental / absolute choice function
|
Subroutine multiple, multiple calls to
set the function code data correction units set the function
hardware and software trip protection function
track break points, the anti-tracking from point
taper machining and cutting the upper and lower shaped function
program path zoom, rotate, mirror and switch to
constant speed shaft, servo feed selection function automatically selects the pause function
path to image scaling, angle setting background operations
Automatic vertical calibration |
| WIRE CUTTING BED Technical parameters |
| Parameter
|
UY-4030F |
UY-5040F |
UY-6040F |
| Axis travel
£¨XxYxZ£©(mm) |
400X300X200 |
500X400X250 |
600X400X250 |
| Axis travel
£¨UxV£©(mm) |
70X70 |
90X90 |
90X90 |
| Maximum size
(mm) |
250X500X180 |
800X550X260 |
1000X700X260 |
| Diameter
(mm) |
Φ0.15~0.3 |
Φ0.15~0.3 |
Φ0.15~0.3 |
| Maximum wire feed speed
(mm/s) |
300 |
300 |
300 |
| Tension
(gf ) |
100~2500 |
400~2500 |
400~2500 |
| Maximum cut slope
(mm) |
±20°/80 |
±20°/80 |
±20°/80 |
| Dimensions
(m) |
1.4X1.8X2.2 |
1.5X1.9X2.3 |
1.6X2.0X2.3 |
| Maximum workpiece weight
(kg) |
300 |
400 |
500 |
|
| |
|
|
